Creality CR 10 S5 Upgrades
Creality CR 10 S5 have been made for the ones who are looking for a large scale printer. The S5 Comes with a printing volume of 500 x 500 x 500 mm. Yet, the printer is considered to be an old printer that doesn’t include much features. Even, the heated bed came in some versions with smaller size than the printing area. In this article we will cover the upgrades that can be done for the CR 10 S5 to make it able to print.
SKR Mini E3 V3 Upgrade for CR 10 S5
The main board that came originally with the CR 10 S5 must be replaced due to the old stepper motor drivers low ability to modify it and lack of ports. Thus, SKR mini E3 V3 is the best option to replace it with.
The replacement of boards for CR 10 S5 is pretty simple. For the configuration it can be downloaded from official
marline website.
Micro Probe for CR 10 S5 with SKR Mini E3 V3
- Placing a bed leveling sensor for CR 10 S5 is a must otherwise it would be impossible to print with the full bed volume. The best bed leveling available in the market is the micro probe, which provides a precise values and comes with an affordable price.
The connection is:
- White (Probe) and Black (GND) to Z end stop pin
- Black (GND), Red (5V) and Yellow (Servo) are going to be connected to BLTOUCH port.
The attacher can be downloaded from
here.
The configuration files are for normal bed:
If you are using an AC bed, which is controlled separately from the board these are the configuration for you:
Wishlist -
0 Comments