Ender3/PRO/V2- Aquila Dual Z Kit

Specification.

• Material: Sheet Metal+Stainless Steel
• Axis Length: approx. 36.5 cm(14.37inch)
• Product Weight approx. 800G
• Item included:
• 1 x 42-34 Stepper Motor2 x Lead Screw Bearing Guide2x Power Supply Holder

  1 x Coupler

  1 x Z Axis Lead Screw Bracket with Brass Nut

  1 x Dual Z Stepper Cable

  1 x Z Axis Motor Bracket with screws and t-nuts

  1 x 365mm T8 Lead Screw

  1 x Mini Toolkit

Feature:

1) According to the original factory specifications.

2) Perfect match for the original one.

3) Easy installation.

4) Stable characteristics, high reliability.

Installation

Step 1. Turn off the printer, unplug the power cord, and use a hex wrench to remove the two screws which are secure the power supply. Remove the power supply.

Step 2. Install the coupler on the stepper motorand tighten the screws. Use the hexagon socket screws and the Z Axis Motor Bracket to fix the motor on the aluminum profile

Step 3.Remove all the screws of sheet metal pulley on the right side of the X axis.

Step 4.Use long screws to fix the z axis sheet metal ( )and install it on the X-axis right sheet metal. Screw the T8 screw ( ) into the screw nut to the coupler, and tighten the screw of coupler .

Step 5.Install dual Z stepper cable( ) to the motherboard, and connect two Z motors.

Step 6.Install the Phillips screw and the boat nut on the power supply holder ( ) to install the power supply.

Step 7.Place the lead screw bearing guide( ) on the left and right sides of the X-axis aluminum profile and let the Z-axis rise to the highest position. If one side is uneven, turn the corresponding coupler clockwise.

Step 8. Install the lead screw bearing guide( ) and tighten the screws. Pay attention to the alignment position of the mount, refer to the arrow in the figure below.

Step 9.If any Z axis does not run smoothly during operation, please try to loosen the screws corresponding to the Z axis in the circle on the right.If the right pulley is too loose, adjust the eccentric bolt in the box.