Magigoo Supergrip Glide 250ml

Magigoo Supergrip Glide 250ml is made for 3D printing applications that need dependable adhesion on flexible build plates, including smooth and textured PEI, PC, engineering plates, satin sheets and other coated surfaces. Its strong grip keeps prints securely in place during printing while allowing clean release after cooling, without flaking or losing adhesive on removal.

The 250 ml bottle suits regular printing, large build plates and longer print jobs. Each bottle delivers over 250 full-bed applications on a 235×235 mm plate, with multiple prints possible per application, significantly more than standard Magigoo adhesives.

Unlike other Magigoo products, Supergrip is applied to a cold plate. Shake the bottle for three to five seconds, press the nib against the plate to activate the spring valve, and spread one thin stripe back and forth. Even coverage matters more than thickness. No drying time is needed: heat the bed and print. The thermo-responsive polymer activates as the bed reaches your filament's temperature.

Feature	Details
Size	250 ml bottle
Formula	Thermally activated, water-based
Application	Cold plate, valved nib
Coverage	250+ full-bed applications
Cleanup	Damp cloth and water only
Origin	Made in Malta

Supergrip is optimised for PLA and ASA and compatible with several other materials:

Material	Status	Bed Temperature
PLA	Optimised	As low as 45 °C
ASA	Optimised	Per filament spec
PETG	Compatible	Per filament spec
TPU	Compatible	Per filament spec
HIPS	Compatible	Per filament spec

When printing finishes, flex the plate gently to release the part, letting it cool a few minutes if it resists. If a print will not stick, raise the bed temperature in 5–10 °C steps and keep the layer thin. Even at lower bed temperatures, it keeps PLA adhered with minimal warping.

Magigoo Glide Supergrip 250ml

الوصف

الملاحظات

مشاركة العنصر