Magigoo Glide Original Kit

Magigoo Glide Kit (Original) is a complete solution for applying and maintaining Magigoo Original adhesive on your build plate. The roller helps apply a smooth, even layer, while the cloth makes it easy to clean the surface between prints. Magigoo Original provides reliable first-layer adhesion for PLA, ABS, PETG and other common thermoplastics.

The thermally activated, water-based formula is applied through a valved nib. Shake the bottle for three to five seconds, press the nib against the bed to activate the spring valve, and spread one thin, even layer across the print area. Best applied on a cold bed.

No drying time is needed. Print according to your filament manufacturer's recommendations, starting at the lower end of the range and increasing in 5 °C steps to dial in adhesion. When printing finishes, let the bed cool by around 30–40 °C and the part usually releases on its own. Cleanup needs only a damp cloth, with no chemicals or scraping.

If a print sticks too well and the first layers bulge, the bed is likely too hot, so lower it in 5–10 °C steps. The applicator releases product only when pressed, so press the nib rather than squeezing the bottle.

Kit Component	Details
Glide Roller	Spreads a smooth, even layer
Magigoo Original	250 ml bottle, valved nib
Cleaning cloth	Keeps the surface clean
Formula	Thermally activated, water-based
Origin	Made in Malta

Recommended bed temperatures by material:

Material	Status	Bed Temperature
PLA	Optimised	50–70 °C
PETG	Optimised	70–90 °C
ABS	Optimised	90–110 °C
TPU	Optimised	40–60 °C
HIPS	Compatible	90–110 °C
ASA	Compatible	90–110 °C

HIPS may need a brim or raft, and ASA works with some filament brands and suits glass plates best.

Magigoo Glide Orginal Kit

Description

Notes

Share Product